OPERATION GUIDE - IMAGE SEND SETTINGS - FAX FUNCTIONS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-070.htm[24/03/2011 3:04:45 PM]
MX-2610N / MX-3110N / MX-3610N
IMAGE SEND SETTINGS - FAX FUNCTIONS
SETTING MODE
You can select the image send settings of fax functions.
Fax Settings
Fax Default Settings
The fax settings can be enabled or disabled to suit the needs of your workplace.
Dial Mode Setting
This setting can only be activated in Canada. Select the appropriate setting for your telephone
line type.
Dial Mode Setting
Select the line type from the list.
Auto Select
Select this after the line has been connected to have the machine automatically detect whether
your line is a pulse dial line or a tone dial line.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "
") and a fax is received, this
function activates the machine and prints the fax.
When this function is disabled, received faxes are not printed until the [Power] button is
switched "On".
Pause Time Setting
Changes the length of pauses inserted in fax numbers.
If a hyphen (-) is entered when dialling or storing a fax number, a pause of 2 seconds is
inserted.
It can be set between 1 and 15 seconds, in every 1 seconds.
* Note that in South Africa, the machine is normally set to 4 seconds.
Fax Dest. Confirmation Mode
This setting specifies whether or not a destination verification message is displayed when
sending a fax in order to prevent accidental transmission to the wrong destination.
Speaker Settings
Use these settings to set the sound heard from the speaker for the Speaker, Ringer Volume,
Line Monitor, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax
Communication Error Signal. For the Fax Receive Complete Signal, the Fax Send Complete