manualshive.com logo in svg

Sharp MX-2010U, Руководство по эксплуатации

Sharp MX-2010U - многофункциональное устройство с скоростью печати 20 стр./мин. Операционное руководство доступно бесплатно для загрузки на manualshive.com. Получите полную информацию о функциях и настройках устройства, прочитав руководство перед использованием. Легкость в использовании и высокое качество печати делают его отличным выбором для офиса.

Поделиться
Скачать
background image

4-23

FACSIMILE

Contents

Storing a destination from a global address book in the machine's 
address book

A destination from a global address book can be stored in the machine's address book as a one-touch key.
Touch the [Detail] key in the search results screen of the global address book (the screen of step 3 above) to display 
information on the selected destination. Touch the [Register] key in the detailed information screen and then touch the 
item to be used (the [Fax] key in this case). The following screen will appear.

The information stored in the global address book is automatically entered. (The settings can be changed if needed. For 
detailed information on each item, see "

Address Control

" (page 7-16) in "7. SYSTEM SETTINGS".) However, configure 

the items below manually. To complete the storing procedure, touch the [Exit] key.

• [Initial] key: Touch this key to enter the initials that determine where the destination will appear in the alphabetical 

index and the order of one-touch key display. Enter up to 10 characters for the initials.

• [Index] key: Touch this key to select the custom index in which the address will appear. You can also select whether 

or not the destination will be included on the [Freq.] tab of the address book.

• [Mode] key: Touch this key to configure the "Transmission Speed" and "International Correspondence Mode" 

settings. These settings have already been configured, however, if the destination is an international 
destination, or if you find that communication errors frequently occur when communicating with that 
destination, you can try changing the settings.

3

Select the destination.

(1) Touch the key of the desired destination.

If no names are found that match the search letters, a 
message will appear. Touch the [OK] key to close the 
message and touch the [Search Again] key to search 
again.

(2) Touch the [To] key.

This enters the selected destination.
If you wish to select another destination, repeat steps (1) 
and (2) above.

• If 30 or more matches are found, a message will appear in the screen. Touch the [OK] key to close the message. A 

maximum of 300 search results are displayed. If the desired destination was not found, touch the [Search Again] 
key to add more search letters.

•

To check the information stored in a destination...

Touch the key of the destination and then touch the [Detail] key. The information stored for the selected destination 
will appear. Check the information and then touch the [OK] key to return to the search results screen.

•

If a screen for selecting the item to be used appears...

If the selected destination includes an E-mail address or other address in addition to the fax number or telephone 
number, you will need to select which item you wish to use. Touch the [Fax] key to retrieve the fax number.

1

2

XXX AAA

0123456789

0612345678

0601234567

0687654321

0676543210

XXX

XXX BBB

9876543210

XXX CCC

XXX EEE

XXX FFF

XXX DDD

To

Cc

Detail

Search Again

Address Book

Address Review

Condition

Settings

(1)

(2)

Search Number

Name

Initial

Index

Fax No.

001

AAA AAA

0123456789

AAA AAA

A

User 1

Key Name

33.6 kbps/None

Mode

Direct Address / Individual

Exit

E-mail

Internet Fax

Fax

Содержание MX-2010U

































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-2010U

NEC 870 - SuperScript B/W Laser Printer Network Quickstart preview
870 - SuperScript B/W Laser Printer
Бренд: NEC Страницы: 8
Magicard Prima Brochure preview
Prima
Бренд: Magicard Страницы: 6
QMS 1060 User Manual preview
1060
Бренд: QMS Страницы: 311
OKIDATA OL600e Service Manual preview
OL600e
Бренд: OKIDATA Страницы: 182
Triumph Adler P-6038i Quick Manual preview
P-6038i
Бренд: Triumph Adler Страницы: 4
Posnet TEMO ONLINE Quick Start Manual preview
TEMO ONLINE
Бренд: Posnet Страницы: 2
OKIDATA Microline 393 Setup Manual preview
Microline 393
Бренд: OKIDATA Страницы: 44
Epson Stylus C110 Series Start Here preview
C110 Series
Бренд: Epson Stylus Страницы: 4
Panduit TDP42HY Operator'S Manual preview
TDP42HY
Бренд: Panduit Страницы: 85
Ricoh SP C222DN Administration Manual preview
SP C222DN
Бренд: Ricoh Страницы: 284
Oki C6150dn Manual De L'Utilisateur preview
C6150dn
Бренд: Oki Страницы: 309
NEC PC-8000 Series User Manual preview
PC-8000 Series
Бренд: NEC Страницы: 90
Infotec IS2216 Launch Manual preview
IS2216
Бренд: Infotec Страницы: 52
Xiaomi Xprint User Manual preview
Xprint
Бренд: Xiaomi Страницы: 7
Ricoh InfoPrint 6500 Reference Manual preview
InfoPrint 6500
Бренд: Ricoh Страницы: 4
Ricoh LS3000 Operating Instructions Manual preview
LS3000
Бренд: Ricoh Страницы: 40
Ricoh Aficio GX3000 Specification Sheet preview
Aficio GX3000
Бренд: Ricoh Страницы: 4
Ricoh Aficio 2232C Technical Bulletin preview
Aficio 2232C
Бренд: Ricoh Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды