Sharp IV-S20 Скачать руководство пользователя страница 39

Страница: 39 / 399

3-18

Operation Examples (Degree of match inspection)

Object to be measured

Image 0

Image window (for setting the range where the
degree of match will be evaluated)

MES.WINDOW(MDL0) RECTANGLE

XLINE

YLINE

REF IMAGE(MDL0)

MOVE

UP.L(224,208) LO.R(287,271) REG. DISP

SEARCH AREA(MDL0) MOVE UP.L(216,200) LO.R(295,279)

DTECT COORD(MDL0) CNTR

FREE(256,240)

CONTR.PIXEL(MDL0) 1

DETECT ACCURANCY STANDARD

HIGH

UPPER MENU

Object to be measured

Search window (dotted line)

MOVE

The white rectangle is moved using the up, down, right or left keys (4 pixels at a time).

UP.L

The upper left corner is moved using the up, down, right or left keys (4 pixels at a time).

LO.R

The lower right corner is moved using the up, down, right or left keys (4 pixels at a time).

Continued from the preceding page

(7) Operation for the gray scale search matching setting (setting the reference image 0)

1. Press the ESC key, and all menus to be used for setting the gray scale search conditions will

be displayed.

- If the menu overlaps the image to be measured, so that further image setting is hindered,

press the ESC key. Only item

will be displayed.

2. Move the cursor to

REF IMAGE (MDL0) (reference image) with the up and down keys,

and press the SET key.

3. Create an image window (solid line) for use as the reference image.

- Move the cursor to MOVE, UP.L or LO.R with the left and right keys, and press the SET key.

Then, position the window.

When the position is correct, press the SET key.

- After the image window position has been defined, move the cursor to REG. (register) with

the left and right keys, and press the SET key.

- Move the cursor to DISP (display) with the left and right keys, and press the SET key. Then,

the stored image will be displayed in the lower right corner of the screen. After checking the
image, press the ESC key.

4. Press the ESC key and move the cursor to

SEARCH AREA (search window). Then, press

the SET key.

5. Create a search window (dotted line) to be used as the search area.

- The search area is the area within which the new image will be searched for a match with

the image stored in step 2 and 3. The gray scale search function performes the search
operation. (see "Glossary").

- The procedure for defining the search area is the same as in step 3.

- After defining the search window size and position, press the ESC key.

Continued on the following page

Содержание IV-S20
















































































































































































































































































































































































































Результаты поиска

Содержание IV-S20

Отзывы:

Похожие инструкции для IV-S20

Бренды по названию

Популярные бренды

Sharp IV-S20, Руководство пользователя

Результаты поиска

Содержание IV-S20

Отзывы:

Похожие инструкции для IV-S20

Бренды по названию

Популярные бренды