Sharp IV-S20 Скачать руководство пользователя страница 163

Страница: 163 / 399

9-26

Shared settings

Continued on the following page

From the previous page

After selecting item

SYSTEM-IN/OUT, on the [OBJECT TYPE COND] (conditions of object type) menu.

When the selected camera is CAM 1&2

When the selected camera is either CAM1 or CAM2

[OBJECT TYPE I/O]

MONITOR LIGHT LVL

CAM1(1~2) NO

YES

TRIGGER CCD START REG: NO

YES(BIN AVG-LIT-LVL)

COMPUTER LINK OUT BLOCK-00(MESR-0 CAM-1)

&SERIAL OUTPUT

SHUTTER SPEED

1/00060(1/30~1/10000)

STORE REF IMAGE

MOVE

UP.L(224,208) LO.R(287,271

）

REG.

DISP

UPPER MENU

[OBJECT TYPE I/O]

MONITOR LIGHT LVL

CAM1(1~2) NO

YES

TRIGGER CCD START REG: NO

YES(BIN AVG-LIT-LVL)

COMPUTER LINK OUT BLOCK-00(MESR-0 CAM-1)

&SERIAL OUTPUT

SHUTTER SPEED

1/00060(1/30~1/10000)

STORE REF IMAGE

MOVE

UP.L(224,208) LO.R(287,271

）

UPPER MENU

1.Use the up and down keys to set item

STORE REF IMAGE, (reference images for

comparison between images) for comparison between images.

2.Display an image by pressing the SEL key. Then focus the lens and adjust the camera’s iris to

adjust the image.

- After adjusting the image, press the SEL key to freeze the frame.

3.Creating the window for the reference image.

- Select one of the following: MOVE, UP.L, or LO.R. Then adjust the window to suit your

needs.
Decide on the position of the window for the reference image before every operation and
then press the SET key.

4.When the position of the image window has been defined, record the selection by using the left

and right keys to go to REG. (register). Then press SET key.

- Using the left and right keys, go to DISP (display) and then press SET to display the image

in the bottom right hand corner of the screen. When you have finished checking your
selection, press the ESC key to exit.

5.After pressing the ESC key, move the cursor to item

UPPER MENU with up and down keys,

and press the SET key.

This will return you to the [OBJECT TYPE COND] (conditions of object type) menu.

1.Use the up and down keys to set item

SET IMAGE WINDOWS (area setting) for

comparison between images.

2.Display an image by pressing the SEL key. Then focus the lens and adjust the camera's iris to

adjust the image.

3.Select the area of the image to be used.

- Select one of the following: MOVE/UP.L/LO.R and then define the area.

Define the position of the window to be used with the reference image and then press the
SET key.

4.Press the ESC key, move the cursor to item

UPPER MENU with up and down keys, and

press the SET key.

This will return you to the [OBJECT TYPE COND] (conditions of object type) menu.

Содержание IV-S20
















































































































































































































































































































































































































Результаты поиска

Содержание IV-S20

Отзывы:

Похожие инструкции для IV-S20

Бренды по названию

Популярные бренды

Sharp IV-S20, Руководство пользователя

Результаты поиска

Содержание IV-S20

Отзывы:

Похожие инструкции для IV-S20

Бренды по названию

Популярные бренды