6
BEFORE USING THE FAX FEATURE
PARTS OF THE MACHINE
Exit area
The original exits here after transmission or
scanning into memory.
Document feeder tray
Place the original face-up in this tray for
transmission.(p.10)
Original guides
Adjust these guides to match the width of the
original.(p.10)
Document cover
Close this cover to flattenthe original on the
document glass.
Document glass
Books and other originals that cannot be inserted
into the RSPF can be placed here.(p.10)
Operation panel (p.5)
Job separator tray
Received faxes are delivered to this tray. Fax
function lists are also delivered here after printing.
*The job separator tray cannot be used when a
finisher is installed. Also, the output tray can be
changed using a key operator program for the
copy function. See "OUTPUT TRAYS" in the key
operator’s guide.
Centre tray
The output tray for received faxes can be changed
to the centre tray using the key operator programs
for the copy function.
Front cover
Open this cover to remove a misfeed. (See the
operation manual for copier.)
Paper trays
These hold the paper that is used for fax reception
and copying. Each tray holds approximately 500
sheets of paper. (See the operation manual for
copier.)
Power switch
Turns the power on and off.(p.3)
Speaker
The line can be heard through the speaker during
on-hook dialling, as well as the beep that signals
the completion of a fax transmission.
LINE Socket
Insert the telephone line cord here.(p.3)
TEL Socket
Connect an extension telephone here.
The method of connecting an extension telephone
varies by country. For more information, see page
61.
Document cover installed
9
10
11
14
13
12
2
3
4
5
6
7
8
1
1
2
3
4
5
6
7
8
For parts of the machine that are related to
both faxing and copying (parts related to
removing misfeeds, loading paper, etc.), see
"PART NAMES AND FUNCTIONS" in the
operation manual for copier.
9
10
11
12
13
14
Note
