62
CONVENIENT METHODS OF USE
SENDING A FAX AFTER TALKING ON THE PHONE
(MANUAL TRANSMISSION)
If the other fax machine is set to manual reception, you can talk to the other party and then send a fax without
breaking the connection. This procedure is called manual transmission.
1
Make sure that the machine is in fax
mode.
When the [FAX] key light
is on, the machine is in
fax mode. If the light is
not on, press the [FAX]
key.
2
Place the original. (p.10)
3
Select the original size, resolution,
exposure, and other settings as
needed.
• Manually setting the original size (p.20)
• Selecting the resolution (p.21)
• Selecting the exposure (p.22)
4
Lift the extension phone.
Or, you can press the [SPEAKER] key.
("ON-HOOK DIALLING" (p.11))
5
Dial the number of the other party or
touch a rapid key.
You can also dial using
the keypad on the
extension phone.
You cannot use a group
key or a rapid key that
includes a sub-address
and passcode.
6
Speak to the other party when they
answer.
If you used the [SPEAKER] key to dial, lift the
extension phone to talk.
7
After the other party switches to fax
reception, press your [START] key
(
).
Transmission begins.
8
Replace the extension phone.
Automatic redialing ("If the receiving party is busy" (p.15)) will not take place if the line is busy.
Note
If you have loaded the original on the
document glass, you can only send one
page by manual transmission.
SCAN
FAX
DATA
DATA
LINE
JOB STATUS
CUSTOM SE
Note
CORPO. TPS
HARP CORPORATION
SHARP GROUP
SPE
ACC.#-C
