74
PROGRAMMING
STORING A PROGRAM
You can store the following numbers and functions in a program to enable easy transmission by simply executing
the program.
• Destination fax number • RESOLUTION and EXPOSURE settings • POLLING • SLOW SCAN MODE
• DUAL PAGE SCAN* • COVER SHEET • TX MESSAGE • OWN PASSCODE SELECT
• SENDING OPTIONS (CONFIDENTIAL TX, RELAY BROADCAST)
*The only settings that can be selected at the time of execution of a program that includes dual page scanning are
an original size setting and a timer transmission setting.
To store a program, follow steps 1 through 4 on pages 66 to 67 (touch the [PROGRAM] key in step 4), and then
perform the following procedure.
1
Touch the [PROGRAM NAME] key.
The "No." that automatically
appears is the lowest
number from 1 to 8 that has
not yet been programmed.
When the PROGRAM
NAME key is touched, the
letter-entry screen appears.
Enter up to 36 characters
for the name.
See page 81 for the procedure for entering letters.
2
Touch the [SETTINGS] key.
3
Touch the keys for the settings that
you wish to store.
• The [10-KEY PAD] key can be touched to enter a
number with the numeric keys.
• For more information on selecting the settings, see
the following pages:
Exposure (p.22), Resolution (p.21),
Address Book (p.16),
Direct TX (p.7), Memory TX (p.7)
Special modes
• Polling (p.33) • Thin-page scanning (p.39)
• Dual page scanning (p.40) • Cover sheet (p.42)
• Transmission message (p.43)
• Sender (p.45)
• Confidential transmission (p.47)
• Relay request transmission (p.50)
4
Touch the [OK] key.
If you cannot edit or delete a group key
If you attempt to edit or delete a group key in the following situations, a warning message will appear and
editing/deletion will not be possible.
• The rapid key you wish to change or delete is currently being used for transmission or is used in a currently
stored transmission job (including a timer transmission). ("CANCELLING A FAX TRANSMISSION" (p.24))
• The group key is included in the end receiving machines for an F-code relay broadcast operation. ("Editing or
deleting a memory box" (p.107))
• The group key is included in a program. ("EDITING AND DELETING PROGRAMS" (p.75))
If the key is being used for a current transmission or currently stored transmission, cancel the transmission or
wait until it is completed and then edit or delete the key. If the key is included in a program or in the end receiving
machines for an F-code relay broadcast operation, delete the key from the program or operation and then edit or
delete the key.
• A timer transmission setting (p.30) cannot be stored in a program.
• When executing a program, the following functions can be selected:
Timer transmission, original size setting, two-sided scanning, job build mode.
Note
Note
PROGRAM
PROGRAM NAME
SETTINGS
ADDRESS
RESOLUTION
SPECIAL
MODES
No.1
PROGRAM NAME
SETTINGS
ADDRESS
PROGRAM FOR SHARP
RESOLUTION
SPECIAL
MODES
No.1
ADDRESS
BOOK
ENTER PROGRAM YOU REQUIRE.
STANDARD
RESOLUTION
AUTO
EXPOSURE
10-KEY PAD
ADDRESS REVIEW
SPECIAL MODES
CANCEL
OK
DIRECT TX
MEMORY TX