103
KEY OPERATOR PROGRAMS
8
NUMBER OF CALLS IN AUTO RECEPTION
When the reception mode is set to auto, this program
is used to select the number of rings on which the
machine automatically receives a call and begins fax
reception. ("RECEIVING A FAX" (p.25))
A number of rings from 0 to 9 can be selected.
SET THE TELEPHONE NUMBER FOR
DATA FORWARDING
When a problem prevents the machine from printing a
received fax, the fax forwarding function (p.28) can be
used to forward the received fax to another fax machine.
Use this setting to program the fax number of the
destination fax machine. Only one fax number can be
programmed (maximum of 50 digits).
If you wish to specify an F-code confidential memory box
or an F-code relay broadcast memory box in the
destination machine, touch the [SUB ADDRESS] key
after entering the fax number to enter a slash "/", and then
enter the sub-address and the passcode. ("STORING
RAPID DIAL KEYS" (p.68))
INDEX PRINT
This program is used to have an index (black mark)
printed at the top of received fax pages. The mark
moves from left to right as pages are printed.
RECEIVED DATA PRINT CONDITION
When this program is enabled and a received fax is held in
memory because there is a problem that prevents printing
such as no suitable paper, any faxes received after that
fax which can be printed will be given priority and printed.
LETTER SIZE RX REDUCE PRINT
Use this program to reduce received LetterR size faxes to
A4R width before printing. When this program is enabled,
A4R and Letter R are regarded as the same size and thus
A4R size faxes are also reduced.
ENTER JUNK FAX NUMBER
This program is used to store fax numbers from which
you wish to block reception. Up to 50 fax numbers can
be stored (maximum of 20 digits each). To block
reception from the stored numbers, you must also
enable the "ANTI JUNK FAX" program.
ANTI JUNK FAX
Enable this program to block reception of faxes from
fax numbers stored in the "ENTER JUNK FAX
NUMBER" program.
If you select "0" for the number of rings, the
machine will immediately answer and begin
fax reception without ringing in auto
reception mode.
Note
