68
PROGRAMMING
STORING RAPID DIAL KEYS
To store a rapid key, follow steps 1 to 4 on pages 66 to 67 (touch the [RAPID] key in step 4), and then follow the
steps below.
1
Touch the [NAME] key.
The "No." that
automatically appears is
the lowest number from
001 to 500 that has not
yet been programmed.
When the key is touched,
the letter-entry screen
appears. Enter up to 36
characters for the name.
Refer to page 81 for the procedure for entering
letters.
2
Touch the [INITIAL] key.
3
Touch the desired letter key.
If the name entered in
step 1 is in alphabetical
letters, the first letter will
be highlighted.
The selected letter key is
highlighted. If you select
the wrong key, touch the
correct key.
4
Touch the [OK] key.
5
Touch the [INDEX] key.
69
6
Touch the desired index key.
• Select one of the upper row of keys (USER 1
through USER 6) to determine the location of the
rapid key when the GROUP index is displayed
instead of the ABC index (p.79).
• The lower keys are for selecting whether or not to
include the rapid key in the [FREQUENT USE]
index.
• If you touch the wrong key, simply touch the correct
key.
7
Touch the [OK] key.
8
Touch the [FAX No.] key.
The fax number entry
screen appears.
The initial you enter here determines the
position of the rapid key in the ABC index.
For information on the ABC index, see page
8.
DIRECT ADDRESS / RAPID
NAME
INDEX
KEY NAME
FA
INITIAL
MODE
S
INITIAL
SPACE
Note
PACE
ÃÄÂ/ãäâ
12#$%
abc
ABC
AB/ab
CANCEL
OK
NAME
SHARP CORPORATION
INDEX
FAX
KEY NAME
DIRECT ADDRESS / RAPID
NEXT
EXIT
INDEX
USER 2
USER 1
YES
NO
USER 3
USER 4
USER 5
USER 6
OK
SELECT THE CUSTOM INDEX WHERE YOU REGISTER THIS ADDRESS.
DO YOU REGISTER THIS ADDRESS AT THE [FREQUENT USE], TOO?
ORPORATION
FAX No.
MODE
