Sharp Advanced MXM365N Скачать руководство пользователя страница 1430

Страница: 1430 / 1441

s been rightfully obtained by you outside of the United States, you agree that you will not re-

export the Software nor any other technical data received from SHARP, nor the direct produc

t thereof, except as permitted by the laws and regulations of the United states and the laws a

nd the regulation of the jurisdiction in which you obtained the Software.

Government End Users

If you are acquiring the Software on behalf of any unit or agency of the United States Govern

ment, the following provisions apply. The Government agrees:

Disclaim er of W arranty on Sof tware

You expressly acknowledge and agree that use of the Software is at your sole risk. The Softw

are and related documentation are provided "AS IS" and without warranty of any kind and SH

ARP and SHARP's Licensor(s) (for the purpose of provisions 6 and 7, SHARP and SHARP's Li

censor(s) shall be collectively referred to as "SHARP") EXPRESSLY DISCLAIM ALL WARRA

NTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRAN

TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHARP DOES

NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOU

R REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRU

PTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. F

URTHERMORE, SHARP DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGAR

DING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUM

ENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWI

SE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SHARP OR A SHARP AU

THORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE

THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (A

ND NOT SHARP OR A SHARP AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE CO

ST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION, SOME JURISDICTIONS D

O NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION

if the Software is supplied to the Department of Defense (DoD), the Software is classified

as "Commercial Computer Software" and the Government is acquiring only "restricted

rights" in the Software and its documentation as that term is defined in Clause

252.227-7013 (c)(1) (Oct., 1988) of the DFARS; and

(i)

if the Software is supplied to any unit or agency of the United States Government other

than DoD, the Software is classified as "Commercial" that term is defined at 48 C.F.R.

2.101 and as "Commercial Computer Software" that term is defined in 48 C.F.R. 12.212,

and the Government's rights in the Software and its documentation will be as defined in

Clause 52.227-19 (c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of

the NASA Supplement to the FAR.

(ii)

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...

http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...

1430 of 1441

3/17/2016 7:14 AM

«
...
1428
1429
1430
1431
1432
...
»

Содержание Advanced MXM365N


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Advanced MXM365N

Отзывы:

Sharp Advanced MXM365N, Руководство пользователя, Страница: 1430 / 1441

Результаты поиска

Содержание Advanced MXM365N

Отзывы: