SEW-Eurodrive MOVIMOT flexible MMF3 C/DBC Series, Руководство по эксплуатации

Страница: 318 / 432

8
Service
Fault table CiA402 profile
Operating Instructions – MOVIMOT
®
flexible
318
Subfault: 46.50
Description: Warning
Response: Warning with self-reset
Cause Measure
Safety card signals subcomponent fault of the
type "warning". For the exact cause of the fault and for informa-
tion on how to correct the cause of the problem,
refer to the fault reported by the subcomponent
(index 8365.3).
Subfault: 46.51
Description: Fault
Response: Emergency stop + output stage inhibit with self-reset
Cause Measure
Safety card signals subcomponent fault of the
type "standard fault". For the exact cause of the fault and for informa-
tion on how to correct the cause of the problem,
refer to the fault reported by the subcomponent
(index 8365.3).
Subfault: 46.52
Description: Critical fault
Response: Output stage inhibit with self-reset
Cause Measure
Safety card signals subcomponent fault of the
type "critical fault". – For the exact cause of the fault and for informa-
tion on how to correct the cause of the problem,
refer to the fault reported by the subcomponent
(index 8365.3).
– If the jumper plug is plugged at terminal "X6",
remove the jumper plug.
8.7.33 Fault 51 Analog processing
Subfault: 51.1
Description: Analog current input 4 mA limit
Response: Warning with self-reset
Cause Measure
Input current below 4 mA. Check the input current.
8.7.34 Fault 52 Explosion protection function category 2
Subfault: 52.1
Description: Startup error
Response: Output stage inhibit
Cause Measure
No valid startup available. Perform startup.
29128668/EN – 12/2019