SEW-Eurodrive MOVIMOT flexible MMF3 C/DBC Series, Руководство по эксплуатации

Страница: 287 / 432

8
Service
Fault table CiA402 profile
Operating Instructions – MOVIMOT
®
flexible
287
Subfault: 18.4
Description: Task system
Response: Output stage inhibit
System state: Fault acknowledgment with CPU reset
Cause Measure
Error while processing internal task system. This
may be a timeout for cyclical tasks, for example. – Switch the device off and on again.
– Contact SEW‑EURODRIVE Service if the error
persists.
Subfault: 18.7
Description: Fatal error
Response: Output stage inhibit
System state: Fault acknowledgment with CPU reset
Cause Measure
Fatal software error. – Switch the device off and on again.
– If the error occurs repeatedly, replace the
device and send it together with the fault number
to SEW-EURODRIVE. For further support, con-
tact SEW-EURODRIVE Service.
Subfault: 18.8
Description: Invalid fault code
Response: Output stage inhibit
Cause Measure
Invalid fault code requested. – Switch the device off and on again.
– Contact SEW‑EURODRIVE Service if the fault
persists.
Subfault: 18.9
Description: Internal software error
Response: Output stage inhibit
System state: Fault acknowledgment with CPU reset
Cause Measure
The software reports an unexpected event. – Switch the device off and on again.
– If the error occurs repeatedly, replace the
device and send it together with the fault number
to SEW-EURODRIVE. For further support, con-
tact SEW-EURODRIVE Service.
29128668/EN – 12/2019