Sequoia LISST-Holo2, Руководство пользователя

Страница: 42 / 57

42 LISST-Holo2
User’s Guide
Take test image
To take a manual hologram, click the Take images button. You can take up to 20 holograms by
selecting the number using the drop-down menu. The holograms are collected at about 10 frames
per second. If you enter a comment, it will display when reviewing the image details (see section
6.3). Do not change the duration or power settings.
Image file name
You can force the LISST-HOLO2 to start at a certain deployment number or image (hologram)
number. You can also enter a comment that can be used later to identify the holograms, e.g. the
location. Remember to click the Apply button.
Sleep or reboot
Click the Sleep button to put the LISST-HOLO2 to sleep. When the LISST-Holo2 goes to sleep
you will lose connection with the instrument.
Click the Reboot button to reboot the LISST-HOLO2. If you reboot you must re-enter the LISST-
HOLO2 IP address in your browser window to re-establish communication.
Automatic Sleep
If the Automatic Sleep Disable check box is checked as in the example above, the instrument will
not go to sleep between samples. Use this setting if the instrument is connected to external power.
You should UNCHECK this checkbox if the LISST-HOLO2 is only powered by its internal battery.
This preserves battery life.
The Sleep button on the Home page will disappear if the checkbox is checked.
Sync Time
Click the Sync button to synchronize the LISST-HOLO2 to a time server.
The LISST-Holo2 must be connected to the Internet to synchronize the time.
Zero Depth Sensor
Click the Zero Depth button to automatically adjust the offset on the depth sensor.