Sequoia LISST-Holo2, Руководство пользователя

Страница: 12 / 57

12 LISST-Holo2
User’s Guide
Try taking another hologram, but hold a hair or thin piece of string into the laser beam.
You should then see something like the image to the left.
Take another 1-2 holograms with other types of material in the laser beam, e.g. a
screw, or blow some dust through the laser beam when the hologram is captured.
The LISST-Holo2 comes with a test chamber that can be installed between the
windows and be filled with water for testing. To install the chamber, remove the U-
shaped spacer and press the sliding part into the chamber leaving a small gap. Center
the openings of the chamber on the windows and insert the U-shaped spacer so that
the O-rings seal on the area around the window. It can be helpful to push the sliding
part against the window from inside the chamber before installing the U-shaped spacer.
To put the LISST-Holo2 to sleep, click the Home button, then click the Sleep button. If
the Sleep button is not present on the Home page, go to the Tools page and put the
instrument to sleep using the Sleep button on the Tools page (see section 6.6).
The LISST-Holo2 will also automatically enter sleep mode after 10 minutes of inactivity.
To continue Getting Started with the LISST-Holo2 read Section 4, Hologram
Processing with Holo Batch and Holo Detail, or skip to Section 5, LISST-Holo2 Field
Deployment.