Sequoia LISST-Holo2, Руководство пользователя

Страница: 35 / 57

LISST-Holo2
User’s Guide
35
5.4 Wake up / power up LISST-
HOLO2 If the system is in sleep mode (no endcap LED flashes), move the Switch Lever
to the 1 position and then quickly back to the 0 position. This will wake up the
instrument.
The LISST-HOLO2 will boot up and be ready in 40 to 60 seconds.
When the green LED is flashing every few seconds the instrument is awake and
ready to start sampling.
5.5 Start Data Collection
To start the data collection program, move the Switch Lever to the 1 position.
The LED on the endcap will change from green to red indicating that sampling
has begun.
It will blink slowly until the start condition is reached and it will be on
continuously during the acquisition of a hologram.
It will return to green when the stop condition has been reached.
5.6 Stop Data Collection
Data collection will continue until the selected Stop Condition is reached. To
Stop the data collection at any time, move the switch to the 0 position. Within a
few seconds the LED on the endcap should change from Red to Green.
If the data collection has already stopped the LED will be blinking green
regardless of the switch position. However, the Switch Lever should always be
placed in the 0 position when sampling is complete.
5.7 Downloading Raw Holograms
The raw holograms are saved on the internal solid state drive of the LISST-
HOLO2.
Downloading and deleting from LISST-
HOLO2 internal drive To download holograms from the internal drive you will need an FTP utility like
Filezilla (
http://filezilla-project.org ). When you have started the FTP application,
you will need to specify a host. To ensure the LISST-Holo2 remains awake
while downloading images, you should disable automatic sleep on the Tools
page of the Holo2 webpage. If sleep is not disabled, the Holo2 will enter sleep
mode after 10 minutes.
The host is the IP address of the LISST-HOLO2, typically 192.168.0.150 unless
you have changed it to another IP address (see section 8.3).
Leave the username and password blank
Click the Quickconnect button to start the FTP transfer.