Segway SE-3 Patroller, Руководство по обслуживанию

Страница: 97 / 148

Service Manual
89
Accessing the Motor Cavity
Tools Required: 3 mm hex wrench
Torque wrench
Accessing
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module ( page 8 )
b. Storage Trays ( page 13 )
c. Bib Panel ( page 14 )
d. Glove Box ( page 16 )
e. Front Cowl ( page 17 )
f. Light Cluster ( page 18 )
g. Left Side Panel ( page 20 )
h. Rider Detect Mat ( page 82 )
3. Lift off the Rider Detect Spacer.
4. Using a 3 mm hex wrench, remove the eight fasteners
as shown in Figure 120 .
5. Remove the Motor Cavity Lid.
Securing
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Align the Motor Cavity Lid on the chassis/frame.
3. Using a 3 mm hex wrench, install the eight fasteners
as shown in Figure 120 .
Torque to 4.0 N-m (3.0 ft-lbf) .
4. Place the Rider Detect Spacer on top of the Motor
Cavity Lid.
5. Install the following components:
a. Rider Detect Mat ( page 82 )
b. Left Side Panel ( page 20 )
c. Light Cluster ( page 18 )
d. Font Cowl ( page 17 )
e. Glove Box ( page 16 )
f. Bib Panel ( page 14 )
g. Storage Trays ( page 13 )
h. Battery Module ( page 8 )
6. Perform post-service tests ( page 127 ).
Figure 120: Motor Cavity Lid
24367-00002
4.0 N-m (3.0 ft-lbf)
Rider Detect Spacer
(23944-00001)
Drive Train