SE-3 Patroller
34
Headlight
The Headlight rests on an adjustable bracket behind the
Windshield.
Tools Required:
3 mm hex wrench
Wire
cutters
Torque
wrench
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module (
page 8
)
b. Storage Trays (
page 13
)
c. Bib Panel (
page 14
)
d. Glove Box (
page 16
)
e. Front Cowl (
page 17
)
f. Windshield (
page 32
)
3. Disconnect the harness. See
Figure 39
.
4. Remove the two cable ties.
5. Using a 3 mm hex wrench, remove the two fasteners
as shown in
Figure 38
.
6. Remove the Headlight.
Installation
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Slide the Headlight harness through the hole in the
bracket.
3. Using a 3 mm hex wrench, attach the headlight to the
bracket as shown in
Figure 38
.
Torque to
1.6 N-m (1.2 ft-lbf)
.
4. Connect the Harness. See
Figure 39
.
5. Install two cable ties.
6. Align the Headlight (
page 35
).
7. Install the following components:
a. Windshield (
page 32
).
b. Front Cowl (
page 17
)
c. Glove Box (
page 16
)
d. Bib Panel (
page 14
)
e. Storage Trays (
page 13
)
f. Battery Module (
page 8
)
8. Perform post-service tests (
page 127
).
Figure 38: Headlight
24315-00006
1.6 N-m (1.2 ft-lbf)
Figure 39: Headlight Harness
Headlight
Connector
Lights
Содержание SE-3 Patroller
