Segway SE-3 Patroller, Руководство по обслуживанию

Страница: 10 / 148

SE-3 Patroller
2
• Use only charging devices approved by Segway and never attempt to bypass or override their charging protection
circuits.
• Do not wash the SE-3 Patroller with a power washer or high pressure hose. Avoid getting water into the Charge Port.
Avoid exposure to heavy downpours or extended periods of heavy rain (including during riding, storage, or while being
transported). Clean with soap and water and a soft cloth. Make sure that the Charge Port is dry before you plug in the
Power Cord. Failure to follow these instructions could expose you to electric shock, injury, burns, or cause a fire.
• Do not submerge the SE-3 Patroller or Battery Module in water. If you suspect the Battery Module has been submerged
or experienced water intrusion, call Segway Technical Support immediately at 1-866-473-4929, prompt #2. Until you
receive further instructions, store the SE-3 Patroller outdoors and away from flammable objects. Failure to do so could
expose you to electric shock, injury, burns, or cause a fire.
• As with all rechargeable batteries, do not charge near flammable materials. When charging, the batteries heat up and
could ignite a fire.
• Failure to adhere to these warnings could lead to serious injury, death, fire, or damage to property.
NOTICE
• Failure to charge the Battery Module could result in permanent damage to the Battery Module. Left unplugged, the
Battery Module could fully discharge over time, causing permanent damage.
• Comply with all local and federal or individual country laws when disposing of and transporting Battery Modules.
Fasteners
WARNING!
• Use only Segway-approved fasteners. Other fasteners may not perform as expected and may come loose.
• Do not tighten or reuse any lock nut. Instead, when any lock nut is loose or removed, replace the lock nut with a new
Segway-approved lock nut.
• Before using a fastener, make certain the fastener is the correct size and type with any necessary washer and thread lock
in place.
• Do not attempt to repair any stripped or damaged screw hole. Instead, replace the part. If a replacement part is not
available, do not reassemble.
• Insert fasteners slowly and carefully. Do not cross-thread or over-tighten fasteners. Tighten only to the prescribed torque.
• Failure to adhere to these warnings could lead to serious injury or death or damage to property.
Cable Ties
CAUTION!
• When removing cable ties, be careful not to cut or nick harnesses. Damaged harnesses must be replaced.
• You must replace all cable ties that you remove. Loose wires can rub against sharp edges, which can cause them to break
over time.
Eye Protection
WARNING!
• When procedures require the use of safety glasses (such as those in which a mallet or solvent is used), failure to wear eye
protection could result in serious injury.
ESD Procedures
CAUTION!
• When a repair involves any electronic components or harnesses, best-practice electrostatic discharge (ESD) control
procedures must be followed. Failure to follow ESD procedures could result in personal injury or damage to property.
General Safety Precautions