Segway SE-3 Patroller, Руководство по обслуживанию

Страница: 90 / 148

SE-3 Patroller
82
Rider Detect Mat
Tools Required: 3 mm hex wrench
Torque wrench
CAUTION!
Do not bend the Rider Detect Mat harness where it connects
to the Rider Detect Mat. The cable can become damaged,
rendering the Rider Detect Mat unusable.
Removal
1. Make sure the SE-3 Patroller is powered off,
unplugged, and the parking brake is engaged.
2. Remove the following components:
a. Battery Module ( page 8 ).
b. Storage Trays ( page 13 ).
c. Bib Panel ( page 14 ).
d. Glove Box ( page 16 ).
e. Front Cowl ( page 17 ).
f. Light Cluster ( page 18 ).
g. Left Side Panel ( page 20 ).
3. Using a 3 mm hex wrench, remove the four fasteners
as shown in Figure 112 .
4. Disconnect the harness from the PI Board.
See Figure 113 .
5. Lift the Rider Detect Mat and slide it off of the SE-3
Patroller.
Figure 112: Rider Detect Mat
Figure 113: Rider Detect Harness
24367-00002
4.0 N-m (3.0 ft-lbf)
Rider Detect Mat
(23714-00001)
Rider Detect Mat