114
Step 3: ETM® System Configuration
–
Masking Config
—Select if you want to mask the source number
only on all outgoing calls on the Span. Do the following to replace
the actual Calling Party Number with a substitute digit string:
a.
Select the
Restrict Calling Party Number
check box, and
then type the substitute number in the
Modify Calling Party
Number
box. You can also leave the text box blank, if desired,
to transmit a null value.
b.
In the
Calling Party Number Type
box, click the down
arrow, and then select the TON for the number you specified in
the
Modify Calling Party Number
box:
National
,
International
,
Subscriber
, or
Unknown
.
7.
PRI Span configuration is complete. Click
OK
to save the settings and
close the dialog box. A message appears asking whether you want to
download the settings to the Span.
8.
Click
Yes
.
Continue with one of the following:
Complete Span-type specific configuration for other types of Spans you
are installing:
-
―SS7 Signaling Link-Specific Span Settings‖ on page 115.
-
More Spans of the same type: ―Importing Span Configuration‖ on
page 118.
If all Span settings have been supplied, continue with ―Installing
Dialing Plans‖ on page 119.
