126
Step 3: ETM® System Configuration
d.
In the
Stop Bits
box, click the down arrow and select value
that matches the corresponding settings on the PBX SMDR
serial port:
1
or
2
.
For IP Network SMDR:
a.
In the
IP SMDR Filter
box, click the down arrow and click
one of the following:
Syslog
,
Unfiltered (UDP)
, or
Unfiltered (TCP/IP)
.
b.
In the
IP Source Addresses
box, you specify the IP address
of the host sending the SMDR. Click
New
, and then type the
IP address of the SMDR source. Optionally, repeat to specify a
backup source, if your network is configured with one.
c.
In the
Port
box, type or select the port on which the Card
receives IP SMDR.
4.
Under the
SMDR Type
box, click
Modify
. The
SMDR Data File
Selection
dialog box appears.
a.
All of the SMDR data definition files in the
<INSTALL_DIR>\ps\software_repository\smdr
folder on
the ETM Server appear in this dialog box. Click the SMDR parse
file that applies to the format in use.
b.
Click
OK
.
