178
Appendix A: Appliance Technical Specifications, Connectors, and Pinouts
ETM
®
1090 Appliance Technical Specifications, continued
Storage Temperature
-4 to 158 F (-20 C to +70 C)
Number of Lines
One T1, North American ISDN PRI, or European ISDN PRI Circuit
Line Rate
1.544 or 2.048 Mbps
Line Framing
SF (D4), ESF, CRC 4
Line Code
AMI, B8ZS, HDB3
Input Signal
0 to -36 dB
Line Build Out
T1: Short Haul 0-660ft (110 ft increments), T1: Long Haul 0, -7.5, -15,
-22.5 dB, E1: 120 Ohm
Keep Alive
Unframed All Ones (AIS)
Network/CO Activation Alarms
LOS and/or Loss of Frame (Red), RAI (Yellow), AIS (Blue)
Equipment/PBX Activation
LOS and/or Loss of Frame (Red), RAI (Yellow), AIS (Blue)
Reporting
Panel LEDs (Network/CO Red and Yellow, CPE/PBX Red and
Yellow), ETM Management Server Diagnostic Messages
Line Supervision Types
Loop Start, Ground Start, Wink Start, Immediate Start, ISDN PRI, R1
Address Signaling Types
DTMF, MF and Pulse Dialing
Signaling Protocols
DID/DNIS, ANI, Caller ID
ISDN Variants
N.A. PRI: NI-2, 4ESS, 5ESS, DMS100
European PRI: NET5, DASS2, DPNSS, QSIG
SS7 Variant
ANSI, ETSI
Other Variants
N.A. PRI: Backup D-Channel and NFAS configurations supported
Line Protection
FCC Part 68 Type A & B (1500V Lightning), Fused Input/Output
Connectors
RJ-45
Speed
10 Mbps or 100Mbps
Signaling Protocol
SIP, H.323
Telephone Network
FCC Part 68, Industry Canada CS-03, TBR-4, TBR-12, TBR-13
EMI/EMC
FCC Part 15, ICES-003, EN55022, EN55024, CISPR 22
Safety
CB Scheme (EN/IEC60950), UL /cUL 60950
