Model 2100 and 3200 Appliances
183
Each four-Span, hot-swappable board set includes:
One Ethernet interface, RJ-45 10/100 Mbps.
Two serial interfaces: RJ-48 Console and Auxiliary ports.
Eight line interfaces: 4 RJ-48 CO, 4 RJ-48 PBX.
Diagnostic LEDs.
The Controller Card is accessed from the front of the Appliance. The
Controller Card contains the
port,
Console
and
Auxiliary
serial ports,
Service
and
Reset
buttons, and LEDs that show the status of
the system.
The illustration below shows the access panel of the Controller Card.
The Digital Trunk Interface connects to the telephone lines via 8 RJ48 telco
connectors, 2 per Span. Eight sets of LEDs that correspond to the numbered
telco connectors indicate alarm status and whether each Span is inline.
The illustration below shows the ports and LEDs on the Digital Trunk
Interface.
Pair 1-Port 1 to CO, Port 2 to PBX
Pair 2-Port 3 to CO, Port 4 to PBX
Pair 3-Port 5 to CO, Port 6 to PBX
Pair 4-Port 7 to CO, Port 8 to PBX
ETM
®
2100 and
3200 Appliance
Board Sets
Controller Card
Digital Trunk
Interface
