40
Step 1: Software Installation
2.
Do one of the following to set the default instance and associate the
appropriate login credentials:
Select
Use database owner
to set this instance as the default
instance and to specify that this instance will use the database
owner’s username and password to access the Management Server
database, and then click
OK
.
Select
Use non-owner database user
to specify that this
default instance will use a specified user’s username and password
to access the Management Server. (The non-owner user account
must have already been created and assigned the required
permissions.) Enter the non-owner database user’s
Username
and
Password
, and then click
OK
.
The ETM Database Maintenance Tool updates the
twms.properties
file on its computer with all of the information the Management Server
needs to connect to the database and access the correct data instance.
3.
Do one of the following:
If the Management Server is installed on the same computer as the
ETM Database Maintenance Tool, database preparation is
complete.
If the Management Server is installed on a different computer from
the Database Maintenance Tool, do one of the following:
–
If no previous modifications have been made to the
twms.properties
file on the Management Server computer,
copy the
twms.properties
file from the ETM Database
Maintenance Tool computer to the Management Server
computer.
–
If modifications have previously been made to the
twms.properties
file on the Management Server computer
(for example, enabling operation through a firewall or
changing the TCP/IP port), either manually edit the applicable
sections of the
twms.properties
file on the Management
Server computer, or copy the updated database information
from the
twms.properties
file on the ETM Database
Maintenance Tool computer and paste it over same sections in
the
twms.properties
file on the Management Server
computer. Perform this step before encrypting passwords in
the files, and then encrypt each file separately.
Continue with one of the following:
If the ETM System components will communicate through a NAT
firewall, continue with "Connecting Through a Firewall" on page
41. If not, see the next bullet.
Continue with "Install the Appliances" on page 49.