118
Step 3: ETM® System Configuration
After you have completed configuration for a Span, you can import its
settings to apply to another Span of the same type. Settings can only be
imported to a single Span at a time, not globally.
To import Span settings
1.
In the
Platform Configuration
subtree, right-click the Span into
which you want to import settings, and then click
Edit Span(s)
.
2.
Click
Import
. The
Import
Span
Attributes
dialog box appears.
Only Spans of the same type appear as import choices.
3.
Click the Span whose attributes you want to apply to the selected Span,
and then click
OK
. The
Configuration
dialog box is populated with
the settings that you imported.
4.
Click the
General
tab and assign a
Span ID
to the Span if you have
not yet done so.
5.
Click
OK
to accept the configuration.
For each Span you are configuring, continue with "Installing
Dialing Plans" on page 119.
Importing Span
Configuration