Unpacking and preparing the enclosure
39
Figure 23 Default belt straps already around the storage enclosure
b.
Optional lift handles: Locate two to four people to assist in moving the storage enclosure onto the mechanical lift,
using an appropriate safe lifting technique and following the steps for the optional lift handles.
Figure 24 Optional lift handles attached to the storage enclosure
7.
To use the default belt straps, perform the following actions:
a.
Position one person at the front to grip the front belt strap securely by both loops.
b.
Position one person at each rear corner to grip both rear belt straps by the loops on that side.
c.
Simultaneously lift the storage enclosure, using appropriate safe lifting technique while moving it to a
staticprotected location, and then to the mechanical lift for mounting to the rack cabinet.
d.
Skip the optional lift handle step.
8.
For the optional lift handle procedure, perform the following actions:
a.
Skip the default belt strap step.
b.
Separate the left lift handles from the right lift handles. The left ones have a locking edge mid-point on the
bracket, while the right ones have a locking edge towards the bottom of the bracket.
differentiates
between left and right lift handles and their respective enclosure slots.
Buckled belts-strap
Push-pull pin
Optional lift handle (2 per side)
