Unpacking and preparing the enclosure
41
Figure 25 Left and right lift handles and their slots present on the enclosure
c.
Align a left lift handle to the left sidewall of the storage enclosure chassis.
d.
Holding a lift handle flat against the front-most portion of the left chassis sidewall, slide it upwards until its
push-pull pin engages the push-pull pin hole to secure it.
Figure 26 Fixing front left lift handle to the enclosure slots
e.
Repeat for the back-most left position.
f.
Verify you securely fastened both handles, since the lift handles will bear the full weight of the enclosure while
moving it to a static-protected location, then the mechanical lift.
g.
Repeat the same procedure for the positions symmetrically placed on the right sidewall for the right lift handles.
NOTE:
Slots of left and right lift handles are not similar, yet their attachment procedure is same.
h.
Position one person at each side of the storage enclosure. If you are not comfortable lifting the weight of the
enclosure with two people, position two people on each side of the storage enclosure.
i.
Securely grasp one or both handles on the same side of the chassis, depending on the number of people involved,
and lift the storage enclosure.
9.
Place the storage enclosure in a static-protected area until you are ready to move it to the mechanical lift for
mounting in the rack cabinet.
Slots for right lift handles’ locking edges
Holes for push-pull pin insertion
