Scientific
SMO1000E
49/185
Sample Rate
The maximum sample rate of the oscilloscope is 1GSa/s. The actual sample rate of the
oscilloscope is determined by the horizontal scale. Turn the
Horizontal Scale Knob
to
adjust the sample rate.
The actual sample rate is displayed in the information area at the upper- right corner of
the screen.
The influence on the waveform when the sample rate is too low:
1. Waveform Distortion:
when the sample rate is too low, some waveform details
are
lost and the waveform displayed is rather different from the actual signal.
2. Waveform Confusion:
when the sample rate is lower than twice the actual signal
frequency (Nyquist Frequency), the frequency of the waveform rebuilt from the
sample data is lower than the actual signal frequency. The most common aliasing is
the jitter on fast edge.
3. Waveform Leakage:
when the sample rate is too low, the waveform rebuilt from
the
sample data does not reflect all the actual signal information.
Pulse disappeared
Содержание SMO1000E
