Scientific SMO1000E, Руководство пользователя

Страница: 13 / 185

Scientific
SMO1000E 13/185
Document Overview
This manual introduces how to use the digital oscilloscope in details.
Quick Start Provide information about preparations before using
the instrument and a brief introduction of the
instrument.
To Set the Vertical System Introduce the functions of the vertical system of the
oscilloscope.
To Set the Horizontal System Introduce the functions of the horizontal system of the
oscilloscope.
To Set the Sample System Introduce the functions of the sample system of the
oscilloscope.
To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling,
trigger hold off, external trigger and various
trigger types of the oscilloscope.
Serial Trigger Introduce how to trigger the input signal.
To Save Reference Waveform Introduce how to save and display REF waveform.
To Make Math Operation
Introduce the math operation function of the
oscilloscope.
To Make Cursor Measurements Introduce how to use cursors to make measurements.
To Make Measurements
Introduce how to use measure function to measure the
waveform parameters.
Display Setting
Introduce how to set the display of the oscilloscope.
Save and Recall
Introduce how to save and recall the measurement
result and the setting of the oscilloscope.
System Setting
Introduce how to set the system setup.
Default
Introduce the Default setup of the oscilloscope
Troubleshooting
Introduce how to deal with common failures of
the oscilloscope.