SCHUNK SRM 10, Сборка и руководство по эксплуатации

Страница: 95 / 136

Troubleshooting
8.4 Product does not move
Possible cause Corrective action
Component part defective. Replace component or send it to SCHUNK
for repair.
Have Schunk check the application.
Pressure drops below minimum. Check air supply.
• Size 10 – 14:
} 6.2.2 [ / 41]
• Size 16 – 40:
} 6.2.2 [
/
41]
Compressed air lines switched. Check compressed air lines.
Unused air connections open. Close unused air connections.
• Size 10 – 14:
} 6.2.2 [
/
41]
• Size 16 – 40:
}
6.2.2 [
/
41]
Both exhaust air throttle valves are closed. Open one exhaust air throttle valve.
Proximity switch defective or set incorrect. Adjust sensor or if necessary change sensor.
• Size 10 – 14:
}
6.4 [
/
60]
• Size 16 – 40:
} 7.4 [
/
87]
8.5 Torque is diminishing
Possible cause Corrective action
Compressed air can escape. Check seals, if necessary, disassemble the
product and replace seals.
• Size 10 – 14:
} 9.5 [ / 99]
• Size 16 – 40:
}
10.5 [
/
115]
Too much grease in the mechanical
movement space. Clean and lubricate product.
• Size 10 – 14:
} 9 [ / 96]
• Size 16 – 40:
}
10 [
/
111]
Pressure drops below minimum. Check air supply.
• Size 10 – 14:
} 6.2.2 [ / 41]
• Size 16 – 40:
} 7.2.2 [
/
67]
95 12.00 | SRM | Assembly and Operating Manual | en | 1346850