SCHUNK SRM 10 Скачать руководство пользователя страница 21

Страница: 21 / 136

Basic safety notes

WARNING

Risk of injury from parts coming loose!

If the shock absorbers are faulty, the product can become
damaged. Parts coming loose in this way can lead to injuries.

•

Regularly check the components for wear and damage.

WARNING

Risk of injury if the condition or behavior of the product is
undefined!

Cutting off the compressed air supply in an uncontrolled manner
could lead to undefined states and behavior. This may cause
personal injury or material damage.

•

The operator must define suitable emergency stop and
restarting strategies.

✓

Emergency stop strategies: e.g. by means of controlled shut
down

✓

Restarting strategies: e.g. using pressure build-up valves or
suitable valve switching sequences

WARNING

Risk of injury due to magnetic fields in the immediate vicinity!

In case of exposure to magnetic fields, the product may
malfunction. Workpieces may fall down or be ejected and cause
severe injuries.

•

Sufficiently shield magnetic fields in the immediate vicinity of
the product.

•

Make sure that the product is prevented from malfunctioning.

WARNING

Risk of injury due to contact with lubricants!

Lubricant may cause irritation and allergic reactions if it contacts
the skin or eyes.

•

Avoid contact between lubricant and skin or eyes.

•

Wear safety goggles and protective gloves.

•

Observe information on the safety data sheet of the lubricant.

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды