manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 116

Maintenance, size 16 - 40

116

12.00 | SRM | Assembly and Operating Manual | en | 1346850

13. Pull both pistons (7) out of the housing.
14. Remove piston seals (9) and guide straps (10).
15. Disassemble the stop cover, (2) if necessary.
16. Clean all parts thoroughly, check for damage and wear and

grease with a lint-free cloth or brush.

Assembling

1. Assemble product in the reverse order. Observe the following

when doing this:

✓

Insert new greased seals.

✓

Make sure that the serrations of the pinion and the piston
are sufficiently greased.

✓

Before inserting the pinion (6): position piston (7) on the
dimension "X" in the housing, see following illustration.

✓

Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.

2. Mount product onto the system/machine.

Installation dimension "X" for variant angle of rotation 180°/3° (A) and 90°/3° (B)

Designation

SRM

16

20

25

32

40

Installation dimension "X" - angle of
rotation 180°/3° (A)

25.6 32.2 40.1 48.0 63.9

Installation dimension "X" - angle of
rotation 90°/3° (B)

13.0 16.5 20.5 24.5 32.5

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды