SCHUNK SRM 10 Скачать руководство пользователя страница 91

Страница: 91 / 136

Assembly and settings, size 16 - 40

Only for variant "SI":

Loosen the set-screw of the switching

cam (6) and move the switching cam until it is positioned at
the height of the corresponding sleeve (4).

Only for variant "SI":

Mount switching cam (6) with set-screw.

✓

Tightening torque: 0.5 Nm

8. Push the sleeve (4) in the direction of the switching cam until

the sensor switches.

IMPORTANT! Risk of collision - Do not

push the sleeve (4) too far into the bracket (1).

9. Alternate tightening the set-screws (5), approx. 4x for each half

a turn.

10. Check the switching positions and test the function, re-adjust

the position if necessary.

Version 2: Sensor bracket (1) without sleeve

NOTE

• The switching cams (6) have been factory set at 0°, 90° and

180°. With the variant "SI", the switching cams can be adjusted.

• An "inductive sensing" mounting kit is optionally available as an

accessory from SCHUNK,

}

1.4 [

10]

. Notes on installing the

1. Connect sensor and secure cable, see Sensor Assembly and

Operating Manual.

2. Slide sensor (3) into the sensor bracket (1) until the stop.
3. Tighten screw (2).
4.

Only for variant "SI":

Turn the product counter-clockwise to

the desired position.

Only for variant "SI":

Loosen the set-screw of the switching

cam (6) and move the switching cam until it is positioned at
the height of the corresponding bracket (1).

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды