manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 58

Mounting and adjustments, size 10 - 14

58

12.00 | SRM | Assembly and Operating Manual | en | 1346850

6.3.3 Adjust swiveling time and absorber stroke, variant -X

NOTE

At the factory, the maximum possible absorber stroke was preset.

Designation

SRM

10

12

14

Projection "H" - factory settings [mm]

32

31

37.5

1. Close exhaust throttle valve "A" and "B" completely.
2. Open exhaust throttle valves depending on the load in

accordance with the following diagram.

3. Loosen nuts (B3) and counter-support the adjusting sleeve (B2).
4. Set the absorber to dimension "H" according to the following

diagrams.

5. Tighten nuts (B3) and counter-support the adjusting sleeve (B2).

✓

Tightening torque: SRM 10-X / 12-X: 3 Nm; SRM 14-X: 5 Nm

6. Swivel repeatedly to test the setting, readjust if necessary.

✓

The end positions must be approached gently.

7. Repeat the steps for the other end position.

NOTE

Depending on the loading condition, the settings for the two
shock absorbers may deviate widely from each other.

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды