Assembly and settings, size 16 - 40
82
12.00 | SRM | Assembly and Operating Manual | en | 1346850
7.3.2.2 Base unit with center position (variant -M)
closed
open
Adjustment for end position 1
■
Load that corresponds to the operating conditions is mounted
on the pinion (1).
1. Turn the pinion clockwise to the stop.
2. Close exhaust air throttle valve on air connection "A", "B", "C"
and "D" completely.
3. Apply pressurized air to air connection "C" and "D".
✓
The product swivels to the center position.
4. Open the exhaust air throttle valve "A" incrementally until the
desired swiveling time in the center position is reached and the
over-swiveling and settling of the load in the center position is
low.
IMPORTANT! Too high a swiveling speed leads to more
frequent over-swiveling and settling of the load and thus to
increased wear of the product.
5. Apply pressurized air to air connection "A".
✓
The product swivels from the center position to end
position 1.
6. Open exhaust air throttle valve "C" and "D" incrementally until
the desired swiveling time in the end position is reached.
