SCHUNK SRM 10, Сборка и руководство по эксплуатации

Страница: 114 / 136

Maintenance, size 16 - 40
114 12.00 | SRM | Assembly and Operating Manual | en | 1346850
10.4 Replace shock absorber
Disassembling
1. Ventilate the product.
2. Remove product from the system/machine.
3. Disassemble sensors if necessary.
4. Remove the screws (1).
5. Remove stop cover (2) with flat gaskets (3).
6. Remove the safety ring (4) on piston (6).
7. Pull out shock absorbers (5).
8. Clean all parts thoroughly, check for damage and wear and
grease with a lint-free cloth or brush.
Assembling
1. Insert new shock absorbers.
2. Set shock absorber projection (h),
}
10.3.2 [
/
112] .
3. Set safety ring (4) in the groove of the piston (6).
4. Change the second shock absorber the same way.
5. Insert new flat gaskets (3) into the stop cover (2).
6. Fasten the stop cover (2) to the housing with screws (1).
✓
Tightening torque: SRM 16: 2.2 Nm; SRM 20: 4.3 Nm;
SRM 25: 4.3 Nm; SRM 32: 7.3 Nm; SRM 40: 18 Nm
7. Check absorber stroke and readjust if necessary.
8. Mount product onto the system/machine.