SCHUNK SRM 10, Сборка и руководство по эксплуатации

Страница: 54 / 136

Mounting and adjustments, size 10 - 14
54 12.00 | SRM | Assembly and Operating Manual | en | 1346850
6.3.2.2 Set swiveling time, variant -M
NOTE
The optimal swiveling speed is achieved by adjusting the swiveling
time on the exhaust air throttles and adjusting the absorber
stroke. Schematic illustration of the optimal
adjustment,
}
6.3.4 [
/
59] .
CAUTION
Material damage due to too high swiveling speed!
If the swiveling speed is too high, the assembly will be
decelerated abruptly by the shock absorber and will continue to
oscillate until reaching the end position. This will overload the
shock absorber and may cause damage to it.
•
Adjust the swiveling speed in a way, that the movement
decelerate smoothly in the end position.
closed
open
Adjustment for end position 1
■
Load that corresponds to the operating conditions is mounted
on the pinion (1).
1. Turn the pinion clockwise to the stop.
2. Close exhaust air throttle valve on air connection "A", "B" and
"C" completely.
3. Apply pressurized air to air connection "C".
✓
The product swivels to the center position.
4. Open the exhaust air throttle valve "A" incrementally until the
desired swiveling time in the center position is reached and the
over-swiveling and settling of the load in the center position is
low.
IMPORTANT! Too high a swiveling speed leads to more
frequent over-swiveling and settling of the load and thus to
increased wear of the product.