SCHUNK SRM 10, Сборка и руководство по эксплуатации

Страница: 63 / 136

Assembly and settings, size 16 - 40
Overview
1. Screw the product to the machine/system,
}
7.2.1 [
/
64] .
✓
Use centering sleeves from the enclosed accessory pack.
✓
Observe the tightening torque for the mounting screws.
2. Fasten attachment with centering sleeves and fastening screws
onto the pinion. IMPORTANT! Insert centering sleeves by
hand. Do not hammer the pinion.
3. In the main air connections "A" and "B", screw in throttle
valves and connect compressed air lines, } 7.2.2 [
/
67] .
✓
IMPORTANT! Property damage caused by missing
components!
Mount fixed throttle and throttle valves from
the accessory pack in the compressed air lines for air
connections "a" and "b".
✓
Use O-rings from the accessory pack.
4. Variant with center position (M): Screw exhaust air throttle
valves into the main air connections "C" and "D" and connect
compressed air line,
} 7.2.2 [ / 67] .
5. Check that all of the throttle valves are closed.
6. Screw in locking screws in open and not required air
connections where appropriate.
7. Variant with fluid feed-through: remove locking screws from
required connections. Screw in suitable connections and
connect hoses,
} 7.2.3 [ / 71] .
✓
For hose-free direct connections, use the O-rings from the
accessory pack.
8. Variant with electrical rotary feed-through: connect
connection cable, } 7.2.4 [ / 73] .
✓
If necessary, connect hoses for fluid feed-through.
✓
For hose-free direct connections, use the O-rings from the
accessory pack.
✓
Seal those connections that are not needed using the
protective caps from the accessory kit.
9. Adjust end positions, } 7.3.1 [ / 77] .
10. Mount the sensor,
}
7.4 [
/
87] .
11. Adjust swiveling speed,
}
7.3.2 [
/
80] .
12. Adjust shock absorber stroke, } 7.3.3 [ / 85] .
63 12.00 | SRM | Assembly and Operating Manual | en | 1346850