manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 89

Assembly and settings, size 16 - 40

7.4.3 Mounting programmable magnetic switch MMS 22-PI1

CAUTION

Risk of damage to the sensor during assembly!

•

Observe the maximal tightening torque.

The sensors can be mounted via four grooves in the housing of the
product.

1. Connect sensor and secure cable, see the Sensor Assembly and

Operating Manual.

2. Apply air pressure to connection "A" (4).

✓

Pinion (2) swivels towards the end position.

3. Hold teaching tool to the sensor (1) until the sensor flashes.
4. Insert or screw the sensor (1) into the groove (5), until the

sensor flashes rapidly.

5. Tighten set screw (8).

✓

Tightening torque: 10 Ncm

6. Bleed connection "A" (4).
7. Actuate connection "B" (3).

✓

Pinion (2) swivels into the other end position.

8. Repeat steps for the second sensor.
9. Check the switching position and test its function.

89

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды