SCHUNK SRM 10, Сборка и руководство по эксплуатации

Страница: 94 / 136

Troubleshooting
94 12.00 | SRM | Assembly and Operating Manual | en | 1346850
8.2 Product does not travel through the rotating angle
Possible cause Corrective action
Dirt deposits between stop and the piston. Clean and lubricate product.
• Size 10 – 14:
} 9 [ / 96]
• Size 16 – 40:
}
10 [
/
111]
End positions are adjusted incorrectly. Adjust end position.
• Size 10 – 14:
} 6.3.1 [ / 48]
• Size 16 – 40:
}
7.3.1 [
/
77]
Pressure drops below minimum. Check air supply.
• Size 10 – 14:
} 6.2.2 [ / 41]
• Size 16 – 40:
} 7.2.2 [
/
67]
Components have come loose e.g. due to
overloading. Send product with a SCHUNK repair order or
dismantle product.
Shock absorber defective. Check or, if need be, replace the shock
absorber.
• Size 10 – 14:
}
9.4 [
/
98]
• Size 16 – 40:
} 10.4 [ / 114]
8.3 Product rotates jerkily
Possible cause Corrective action
Too little grease in the mechanical guiding
areas. Clean and lubricate product.
• Size 10 – 14:
} 9 [
/
96]
• Size 16 – 40:
}
10 [
/
111]
Compressed air lines blocked. Check compressed air lines of damage.
Swiveling speed too high. Adjust swiveling speed.
• Size 10 – 14:
}
6.3.2 [
/
52]
} 6.3.3 [ / 58]
• Size 16 – 40:
}
7.3.2 [
/
80]