Maintenance, size 10 - 14
98
12.00 | SRM | Assembly and Operating Manual | en | 1346850
9.4 Replace shock absorber
NOTE
Shock absorbers have to be replaced only for variants -H and -X. In
variant -E, the elastomer plugs are fatigue-proof.
Size - Variant
Designation Shock absorber
SRM 10 -H
WP - M 0.1 -143
SRM 10 -X
WP - M 0.1 -149
SRM 12 -H
WP - M 0.1 -144
SRM 12 -X
WP - M 0.1 -149
SRM 12 -S
WP - M 0.1 -166
SRM 14 -H
WP - M 0.15 -186
SRM 14 -X
WP - M 0.15 -176
SRM 14 -S
WP - M 0.15 -196
Disassembling
1. Ventilate the product.
2. Remove product from the system/machine.
3. Measure shock absorber projection "H1" or "H2".
4. Loosen nut (1) and counter-support the adjusting sleeve (4).
5.
Variant -H / -S:
Remove nut (1) and O-ring (2).
Variant -X:
Remove nut (1).
6. Unscrew the shock absorber (3).
Assembling
1. Screw in new shock absorber.
2. Set determined shock absorber projection "H1" or "H2".
3.
Variant -H / -S:
Fit new O-ring (2) and fasten nut (1).
Variant -X:
Fasten nut (1).
4. Check absorber stroke and readjust if necessary.
5. Mount product onto the system/machine.
