Maintenance, size 16 - 40
10.5 Replacing seals
10.5.1 Base unit
Tightening torque [Nm]
Item Designation
SRM
16
20
25
32
40
1
Screw [Nm]
2.2 4.3 4.3 7.3
18
11
Set-screw [Nm]
1
4.3 4.3 4.3
18
12
Thread ring [Nm]
0.7 2.0
4
5
8
Disassembling
1. Ventilate the product.
2. Remove product from the system/machine.
3. Disassemble sensors if necessary.
4. Insert disassembly tool (13) with the cylindrical pins into the
threaded ring (12).
Note: the disassembly tool is available as an accessory from
SCHUNK,
5. Carefully turn the disassembly tool (13) with a wrench and
unscrew the threaded ring (12).
6. Remove set-screws (11).
7. Screw the screws that come with the spare parts package
alternately into the loosened threaded holes, pushing the
pinion (6) upwards out of the housing. Make sure that the
pinion does not tilt when pressed out.
8. Remove pinion (6) with bearing (5) from above.
9. Remove O-ring (4).
10. Remove the screws (1).
11. Remove stop cover (2) and cover (8).
12. Remove flat gaskets (3).
115
12.00 | SRM | Assembly and Operating Manual | en | 1346850
