manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 120

Maintenance, size 16 - 40

120

12.00 | SRM | Assembly and Operating Manual | en | 1346850

5. Loosen screws (1) and pull flange shaft (3) up off the pinion.

✓

Seals (4/10) become accessible.

6.

Size 20 – 25:

 Remove seals (4/10) from the housing (5).

7.

Size 32 – 40:

 Pull off the seals (10) from the flange shaft (3).

8. If necessary, change seals on the base unit, 

}

 10.5.1 [

/

 115]

.

Assembling

1. Assemble product in the reverse order. Observe the following

when doing this:

✓

Size 20 – 25:

 Assemble two-piece seals (10). Insert the hard

plastic ring into the softer elastomer ring. 
Insert new greased seals (4) at top and bottom and two-
piece seal (10) in the center.

✓

Size 32 – 40:

 Insert new greased seals (10).

✓

Make sure that O-ring (7) and all centering sleeves (8) are
inserted in the base unit (9).

✓

Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.

2. Mount product onto the system/machine.

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды