SCHUNK SRM 10 Скачать руководство пользователя страница 35

Страница: 35 / 136

Mounting and adjustments, size 10 - 14

6 Mounting and adjustments, size 10 - 14

6.1 Assembling and connecting

WARNING

Risk of injury due to unexpected movements!

If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.

•

Before starting any work on the product: Switch off the power
supply and secure against restarting.

•

Make sure, that no residual energy remains in the system.

CAUTION

Material damage due to faulty settings and assembly.

If the end position is approached too aprubtly, the product may
be damaged.

•

Ensure the turning / swiveling movement is carried out
without bouncing or bumping.

•

Therefore provide sufficient throttling and damping.

•

Please observe the information in the catalog data sheet.

CAUTION

Material damage due to opened exhaust air throttle valves!

If during first actuation the exhaust throttle valves are open, the
product may move in an uncontrolled manner.

•

Close the exhaust air throttle valves completely before
applying pressure.

NOTE

• Observe the requirements for the compressed air

supply,

}

3 [

22]

• In case of compressed air loss (cutting off the energy line), the

product loses its dynamic effects and does not remain in a
secure position. However, the use of a SDV-P pressure
maintenance valve is recommended in this case in order to
maintain the dynamic effect for some time.

Overview

1. Screw the product to the machine/system,

}

6.2.1 [

37]

✓

Use centering sleeves from the enclosed accessory pack.

✓

Observe the tightening torque for the mounting screws.

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды