manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 87

Assembly and settings, size 16 - 40

Movement

Target position

End position

Target time

Time T

Damping

Absorber stroke is too short. Assembly hits the end position.

7.4 Mounting the sensor

NOTE

Observe the assembly and operating manual of the sensor for
mounting and connecting.

The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see

catalog datasheet and 

}

 7.4.1 [

/

 87]

.

• For technical data for the suitable sensors, see assembly and

operating manual and catalog datasheet.

– The assembly and operating manual and catalog datasheet

are included in the scope of delivery for the sensors and are
available at schunk.com.

• Information on handling sensors is available at schunk.com or

from SCHUNK contact persons.

7.4.1 Overview of sensors

Designation

SRM

16

20

25

32

40

Magnetic switch MMS 22

X

X

X

X

X

Programmable magnetic switch 
MMS 22-PI1

X

X

X

X

X

Reed switch RMS 22

X

X

X

X

X

Inductive proximity switch IN 80

X

X

X

X

X

87

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды