manualshive.com logo in svg

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRM 10 Скачать руководство пользователя страница 85

Assembly and settings, size 16 - 40

7.3.3 Adjust absorber stroke

NOTE

The absorber stroke has been pre-set in the factory and can be
adjusted in order to achieve the optimal swiveling time.

Designation

SRM

16

20

25

32

40

Projection "H" - factory settings
[mm]

3.3

3.8

5.9

8.4

7.0

1. Observe movement of the load in the end positions.

✓

If the absorber stroke is too long, the end position is
reached too slowly.

✓

If the absorber stroke is too short, the attachment strikes
the end position.

✓

Note: schematic illustration of the rotating
motion, 

}

 7.3.4 [

/

 86]

.

2. Loosen nuts (B3) and counter-support the adjusting sleeve (B2).

✓

Reduce

 absorber stroke: unscrew stop pin (B4) with

hexagon socket wrench incrementally approx. 1/4
revolution. 

IMPORTANT! Do not unscrew stop pin too far,

the product may become leaky.

OR

✓

Increase

 absorber stroke: screw in stop pin (B4) with

hexagon socket wrench incrementally approx. 1/4
revolution. 

IMPORTANT! An absorber stroke that is too

long reduces the lifespan of the shock absorbers.

3. Swivel repeatedly to test the setting, readjust if necessary.

✓

The end positions must be approached gently.

85

12.00 | SRM | Assembly and Operating Manual | en | 1346850

Содержание SRM 10









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды