SCHUNK SRM 10 Скачать руководство пользователя страница 60

Страница: 60 / 136

Mounting and adjustments, size 10 - 14

12.00 | SRM | Assembly and Operating Manual | en | 1346850

6.4 Mounting the sensor

NOTE

Observe the assembly and operating manual of the sensor for
mounting and connecting.

The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see

catalog datasheet and

}

6.4.1 [

60]

• For technical data for the suitable sensors, see assembly and

operating manual and catalog datasheet.

– The assembly and operating manual and catalog datasheet

are included in the scope of delivery for the sensors and are
available at schunk.com.

• Information on handling sensors is available at schunk.com or

from SCHUNK contact persons.

6.4.1 Overview of sensors

Designation

SRM

Magnetic switch MMS 22

Содержание SRM 10









































































































































Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды

SCHUNK SRM 10, Сборка и руководство по эксплуатации

Результаты поиска

Содержание SRM 10

Отзывы:

Бренды по названию

Популярные бренды