Relay States
The status of all relays can be displayed on the LCD screen.
1.
Press the
MENU
button to open the
Menu Selection
screen.
2. Scroll to and
Select
the
Thermostat Info
option.
3. From the
Thermostat Info
screen, select the
Status
button.
W1:
Heat Stage 1
W2:
Heat Stage 2
O/B:
Change Over Valve
Fan:
HVAC Fan
Y1:
Stage 1 Cool / Stage 1 Compressor
Y2:
Stage 2 Cool / Stage 2 Compressor
A1:
Auxiliary Relay RS1
A2:
Auxiliary Relay RS2
•
HVAC System:
W1, W2, Fan, Y1, Y2, A1, and A2 are displayed in
Relay Status
screen.
•
Heatpump System:
W1, O/B, Fan, Y1, Y2, A1, and A2 are displayed in
Relay Status
screen.
4. Select
Done
when complete.
Restore Default Settings
1.
Press the
MENU
button to open the
Menu Selection
screen.
2. Press and hold the two middle buttons. After about three seconds, the
Installer Settings
screen will
open
3. From the I
nstaller Settings
window, scroll down to the
Restore Defaults
option.
4. Press the
Select
button.
5. In the next screen, select either
Yes
or
No
to the question
Are you sure you want to do this?
.
6. The SST-W100 will reboot. After the reboot, the main screen will open and the system will be restored to
default factory settings.
SST-W100 Wireless Thermostat Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-0802-08 | 160225
40 of 50
