Indicator
Description
Sys
Sys O
ff
- HVAC system is not running in any mode. HVAC system is idle.
Sys
Sys MOT
- System is o
ff
and Minimum O
ff
Time (MOT) delay On is active.
Sys
Heat ON
- HVAC system is in heating mode
Sys
Cool ON
- HVAC system is in cooling mode
Sys
Heat MRT
- System is On and heating. Minimum Run Time (MRT) delay O
ff
is active.
Sys
Cool MRT
- System is On and cooling. Minimum Run Time (MRT) delay O
ff
is active.
Fan
O
ff
- Fan is not running
Fan
On
- Fan is running
Link
Link OK
- The thermostat is connected to the local network.
Link
No Link
- The thermostat is NOT connected to the local network.
Link
TCP
- Thermostat is synced with Savant Host
Set Clock
To set the clock, follow instructions below.
1.
Power on the thermostat. After the initial diagnostics are complete, the main thermostat control screen
will appear. The time located in the top left of screen will flash indicating it needs to be set. Press the
MENU
button.
2. After pressing the
MENU
button, the
Set Clock
menu shown below will appear. Use the buttons to set
the
Time
and
Date
.
Pressing the up/down arrow buttons will increase or decrease the characters on the
screen that are highlighted.
Pressing the left/right arrow buttons move the cursor to the left or right. Once cursor
gets to the end of each line, it automatically drops to the next line.
Once the
Time
and
Date
is set, pressing the
Set
button will store the time and exit.
Pressing the
Back
button takes the user to the previous screen
3. Once the
Set
button is pressed, the
User Settings
screen will open. Press
Done
to go back to the main
thermostat control screen. The time displayed will be the time set.
IMPORTANT!
The clock on the SST-W100 does not support Daylight Savings Time (DST). It is up to the
customer or installer to manually update the clock during Daylight Saving Time.
SST-W100 Wireless Thermostat Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-0802-08 | 160225
36 of 50
