Reboot the Wi-Fi® radio
After performing maintenance on the local network router, in some instances, the Wi-Fi radio may need to be
rebooted to reconnect to the local network. If the thermostat does not automatically reconnect, perform the
following steps to reboot the Wi-Fi radio.
1.
Press the
MENU
button to open the
Menu Selection
screen.
2. Scroll down and
Select
the
WiFi Setup
option. This will open the
WiFi Setup
screen.
3. Scroll down and
Select
the
Reboot Radio
option. The Wi-Fi radio will reboot.
4. Verify there is communications between the thermostat and either the router or Savant Control system.
5. Select
Done
when complete.
Display the WiFi Network Status
To display information such as the IP Address of the thermostat and SSID of the network, the
WiFi Network
Status
screen can be used. Follow the steps below to view the
WiFi Network Status
screen.
1.
Press the
MENU
button to open the
Menu Selection
screen.
2. Scroll to and
Select
the
WiFi Network Status
option. This will open the
WiFi Network Status
screen.
Review the information and verify all settings.
3. Select
Done
when complete.
SST-W100 Wireless Thermostat Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-0802-08 | 160225
17
of 50
